Javad HPT404BT Operator's Manual page 42

Command Line Interface
GSM
APN Sets/gets the string type value representing the Access Point Name of GPRS which is used to
access the internet.
<value> - string (length < 64 bytes).
Example: next command sets the APN to "connect"
GSM APN connect
Next command gets the currently set APN:
GSM APN
Connect
@00
APNLOGIN Sets/gets the string type value representing the login (user name) which is used in the
authorization process at access point site of GPRS.
<value> - string (length < 64 bytes).
Example: next command sets the login to "user"
GSM APNLOGIN user
Next command gets the currently set login:
GSM APNLOGIN
user
@00
APNPASSWORD Sets/gets the string type value representing the password which is used in the authorization
process at access point site of GPRS.
<value> - string (length < 64 bytes).
Example: next command sets the password to "pswd"
GSM APNPASSWORD pswd
Next command gets the currently set password:
GSM APNPASSWORD
pswd
@00
POWER Sets/gets the power of GSM/GPRS module.
0 – switches OFF the module if it is ON;
1 – switches ON the module if it is OFF.
Example: next command switches ON the power of GSM/GPRS module
GSM POWER 1
Next command gets the power of GSM/GPRS module:
GSM POWER
1
@00
Note:
The GSM command is case sensitive to support possible case sensitive string type values of its
parameters.
42 www.javad.com