Javad DELTA Operator's Manual page 25

9. Open Advanced tab, and then Multipath Reduction subtab. Activate Code multipath reduction
(mpnew) on base and rover for DGPS mode.
For RTK mode activate Carrier multipath reduction (mpnew) as well (Figure 1-13).
10. Click Apply, to save the made changes and settings into receiver's memory and close the dialog
window. The receiver configuration will be kept in the receiver till you will change them or will
clear NVRAM. For detailed description of settings and parameters see NetView Software Manual.
www.javad.com
Figure 1-12. Ports tab
Figure 1-13. Multipath Reduction
Description and Operation
DELTA Configuration
Establishing a USB Cable Connection
25