Sub-Menus; Table Of Menus And Sub-Menus - Multitech MultiModem SF 100-G User Manual

Sub-Menus

Each Menu selection has its own sub-menu, which displays on the left side of the screen.
When you click one of the Main Menu choices, the first screen listed in the sub-menu displays. Choose
other sub-menu options/screens by clicking on its name. The following is an example of the
Administration sub-menu.

Table of Menus and Sub-Menus

Administration
System Setup – Set up the SMTP server for e-mail notifications, the names of individuals who will receive
notifications, and the email ID for the notifications FROM line.
SNTP Client – Set up the synchronization of the MultiModem iSMS clock to real time.
Admin Access – Set up the administrator's password and set an automatic inactivity disconnection interval.
Allowed Networks
Telnet Dialout, and Telnet. The administrator can then add, edit and delete any network. By default,
the LAN network is always allowed access to the MultiModem iSMS. The administrator can configure
the IP Address and Subnet Mask as 0.0.0.0 to allow access to any network.
Remote Syslog – Configure the Remote Syslog status and server's IP. The default is Disabled.
Tools – Reset the cellular modem.
Factory Defaults – Reset all parameters to the original factory defaults.
Network Setup
IP Settings – Specify your LAN settings and your TCP connection.
Cellular Modem – Configure the cellular modem.
SMS Services
Address Book – Manually input names and phone numbers into the phone book.
Groups – Create groups of names with their phone numbers.
International Number
Send SMS Users – Set up users and their passwords.
SMS Settings – Enable or disable extended ASCII character support.
Send SMS – Send SMS messages by manually entering the message or using a message from the
Preconfigured SMS list.
SMS API – This page is divided into two sections: Send API and Receive API.
Send API – Configure the ports for Send APIs as well as enable/disable the service. API commands can
be sent via HTTP or TCP.
Receive API – Configure the SMS to Receive APIs.
Load Balancing (SF 100
Inbox – View messages received.
Outbox – View messages sent.
Multi-Tech Systems, Inc.
– Set the networks to be allowed access to the MultiModem iSMS's WEB GUI,
– Enable or disable international numbers.
only) – Configure multiple units to share traffic load.
MultiModem® iSMS User Guide for Administrators
Chapter 3 – iSMS Basics and Setup Wizard
21