Multitech MultiModem SF 100-G User Manual page 71

Sending to an Address Book Name
The API can be used to send the message to a name in the MultiModem iSMS's address book. If the
name does not exist in the address book, the message is dropped.
HTTP API format is:
http://192.168.2.1[:portnumber]/sendmsg?user=user1&passwd=user1&cat=1
[&modem=2]&ton="bob"&text=message
The parameters are:
•
cat
•
modem Modem index to send SMS (this is only for the SF 400/800 models)
•
ton
•
text
Multi-Tech Systems, Inc.
1
Range : 1 to 4 for SF 400
1 to 8 for SF 800
0 for any modem (Send API job will be distributed via all the available
modems)
If modem is not specified in the request, send API job will be distributed via all the
available modems
The name in the address book where the SMS is to be delivered must be given within
double quotes. The maximum size of each recipient's name is 50 bytes.
The message text to be sent.
Enable Extended ASCII in the MultiModem iSMS to send both ASCII and extended ASCII
characters. By default, Extended ASCII is disabled and the message can have only ASCII
characters.
If Extended ASCII is disabled, a maximum of 160 characters can be sent.
If Extended ASCII is enabled, a maximum of 140 characters can be sent.
MultiModem® iSMS User Guide for Administrators
Appendix A – Application Programming Interface (API)
71