Multitech MultiModem SF 100-G User Manual page 69

HTTP Send API Format
Each "HTTP Send API Request" consists of four parts:
•
The first part is the destination; i.e., the MultiModem iSMS IP and HTTP port number.
•
The second part is the API call which is the query; therefore, it has a '?' post-fixed to the call.
•
The third part is for authentication, which is in the form of a username and password.
•
The fourth part is the message parameters.
Where: portnumber is optional.
modem is optional
user1, puser1, 7634567765 and message are variables / configured parameters.
Note: The MultiModem iSMS can be accessed ONLY from the preconfigured allowed networks.
Example: To access the MultiModem iSMS 204.26.122.125 from 125.63.78.44, you MUST add the network
125.63.78.0 to the following MultiModem iSMS screen: Admin Access >> Allowed Networks
When HTTP Send API is enabled, it is also possible to send SMS from a non-browser with a TCP connection
to the configured HTTP Port by following the steps below:
•
Initiate a raw TCP connection to the MultiModem iSMS IP address over the "HTTP Send API" port
Example : telnet 192.168.2.1 80
•
Issue GET command to send SMS.
•
Issue GET command to query the status of send SMS.
Send API Format
GET
/sendmsg?user=admin&passwd=admin&cat=1[&modem=2]&to=5645676543&ton=Grah
am&group=Engineering&text=This%20is%20a%20test%20message.^M^J
Or
GET
/sendmsg?user=admin&passwd=admin&cat=1[&modem=0]&to=%225678976543%22&to
n=%22Bob%22&group=%22Engineering%22&text=This%20is%20a%20test%20message
.^M^J
Query API Format
GET /querymsg?user=admin&passwd=admin&apimsgid=message id.^M^J
Note: All special characters must be given in URL encoded format with hex value; e.g., space should be
given as %20; double quotes should be given as %22.
Example: If a name is Graham Bell, it should be given as Graham%20Bell
Multi-Tech Systems, Inc. MultiModem® iSMS User Guide for Administrators
Appendix A – Application Programming Interface (API)
69