Appendixg - Regulatory Information - Multitech MultiModem SF 100-G User Manual

Appendix G – Regulatory Information
Restriction of the Use of Hazardous Substances (RoHS)
Multi-Tech Systems, Inc.
Certificate of Compliance
2002/95/EC
Multi-Tech Systems, Inc. confirms that this product now complies with the chemical concentration
limitations set forth in the directive 2002/95/EC of the European Parliament (Restriction Of the use of
certain Hazardous Substances in electrical and electronic equipment - RoHS)
These Multi-Tech Systems, Inc. products do not contain the following banned chemicals:
Lead, [Pb] < 1000 PPM
Mercury, [Hg] < 1000 PPM
Hexavalent Chromium, [Cr+6] < 1000 PPM
Cadmium, [Cd] < 100 PPM
Polybrominated Biphenyl, [PBB] < 1000 PPM
Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM
Moisture Sensitivity Level (MSL) =1
Tin Whisker Growth = None detected
Maximum Soldering temperature = 260C (wave only)
Notes:
Lead usage in some components is exempted by the following RoHS annex; therefore, higher lead
1.
concentration could be found.
a. Lead in high melting temperature type solders (i.e., tin-lead solder alloys containing more
than 85% lead).
b. Lead in electronic ceramic parts (e.g., piezoelectronic devices).
Moisture Sensitivity Level (MSL) – Analysis is based on the components/material used on the
2.
board.
Tin Whisker Study was done per NEMI guidelines (Elevated temperature cycle of 60°C and non-
3.
condensing relative humidity of 87% exposed to this environment for 1000 hours).
Multi-Tech Systems, Inc. MultiModem® iSMS User Guide for Administrators 91