Multitech MultiModem SF 100-G User Manual page 17

5. The Internet Protocol (TCP/IP) Properties screen.
Important Note:
If this screen opens and displays your current IP configuration, we suggest you record this
information for future reference (i.e., after the MultiModem iSMS is configured, you may wish to
return this PC to its original settings).
•
To set a Fixed IP Address for the workstation, select Use the following IP address.
∗ Enter the workstation IP Address. Example: 192.168.2.x.
Note: The x in the address stands for numbers 101 and up.
∗
Enter the workstation Subnet Mask. Example: 255.255.255.0
∗
Enter the workstation Default Gateway. Example: 192.168.2.2
Note:
iSMS.
The factory default settings for the MultiModem iSMS are:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.2
•
Select Use the following DNS server addresses.
∗ Enter the IP Address for the Preferred DNS Server. Example: 205.171.3.65
∗
Click OK.
•
Close the Local Area Properties screen by clicking OK.
•
Close the Control Panel.
•
Repeat these steps for each PC on your network.
Multi-Tech Systems, Inc.
The workstation settings must be in the same subnet range as the MultiModem
MultiModem® iSMS User Guide for Administrators
Chapter 2 – Getting Started
17