Using The Multimodem Isms Wizard Setup; Use The Wizard Setup For Quick Configuration; Benefits Of Using The Wizard Setup; Open The Wizard Setup Screen - Multitech MultiModem SF 100-G User Manual

Using the MultiModem iSMS Wizard Setup

Use the Wizard Setup for Quick Configuration

A quick way to configure the MultiModem iSMS is to use the Wizard Setup. The Wizard Setup can be
opened by clicking the words Wizard Setup located under the menu bar. The information entered here will
default to other screens that require this information.

Benefits of Using the Wizard Setup

•
Saves time so that you are not entering the same information several times.
•
Allows you to start using your device with a minimum configuration.
•
Provides a short way to enter and save information needed to create a connection to the Internet.
Note: Additional features and functions can be set up using the complete Web Interface.

Open the Wizard Setup Screen

After you have logged in, open the Wizard Setup screen by clicking on the words "Wizard Setup" located
under the Menu Bar.
Settings – Enter the following information for your Ethernet network.
LAN IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Save – Click the Save button.
Multi-Tech Systems, Inc.
– 192.168.2.1 defaults into this field.
– 255.255.255.0 defaults into this field.
– Enter your gateway IP Address: example: 192.168.2.2.
– Enter your primary DNS (Domain Server Name) IP Address.
– Enter a secondary DNS IP Address (if any).
MultiModem® iSMS User Guide for Administrators
Chapter 3 – iSMS Basics and Setup Wizard
Configuring the MultiModem iSMS Using the Wizard Setup
23