Triggers; Triggers > Authentic List; Triggers > Broadcast Triggers - Multitech MultiModem SF 100-G User Manual

Triggers

On the four Triggers screens, you can accomplish the following tasks:
•
Establish a list of authentic users – those users who will be allowed to set the triggers (codes or words)
that initiate broadcast messages from a user's remote cell phone.
•
Set up broadcast triggers (codes or words) that will send broadcast messages.
•
Set up action triggers that will cause phone book edits.
•
Compose and save pre-configured messages.
Triggers > Authentic List
Use this screen to set up a list of authentic users. Authentic users will be allowed to set the trigger (codes
or words) that initiates the broadcasting of selected messages.
Authentic List
Click the Add button to display the Address Book from which you can select those users who will be
"authentic users" – users who can send triggers (codes or words) from their cell phones that will allow
them to send a broadcast message.
Note: Without a populated Address Book, no users can be added to the Authentic List.
Triggers > Broadcast Triggers
Use this screen to set up trigger messages, broadcast messages, and authentication parameters.
Broadcast Triggers
Click the Add button to display the Add a Broadcast Trigger screen.
Multi-Tech Systems, Inc. MultiModem® iSMS User Guide for Administrators
Chapter 4 – Using the Web Interface
Triggers > Authentic List
Triggers > Broadcast Triggers
47