Triggers > Action Triggers - Multitech MultiModem SF 100-G User Manual

Triggers > Action Triggers
Use this screen to set up trigger codes or words. Action Triggers are the codes or words sent from a
remote cell phone and received by the MultiModem iSMS – the trigger will execute the action associated
with it. This is a setup screen; no messages are sent from this screen.
The trigger codes or words along with the authentication function may be configured for each trigger
action. If authentication is enabled, only the trigger code or word received from an authenticated user can
trigger the action.
Trigger Action – The following actions are executed when an initiating trigger code or word is detected
from an incoming SMS text message.
Trigger Message (Codes or Words)
Web Interface. These built-in codes can be changed. See the table on the next page for an explanation of
how the trigger codes and their associated trigger actions are created.
Authenticate – If the authenticate option is enabled, only the message received from the configured
authenticated user can trigger the action. The authenticated users are set up on the Triggers > Authentic
List screen.
Enable Authentication
To enable authentication click Edit. The Authenticate column then displays a check box, and the
View/Edit column displays the words Save and Cancel.
Click the check box to enable Authentication for this action and then click Save. If you want to disable
Authentication for this action, simply click Cancel.
Multi-Tech Systems, Inc.
– The trigger codes or words shown on this screen are built in to the
MultiModem® iSMS User Guide for Administrators
Chapter 4 – Using the Web Interface
Triggers > Action Triggers
49