5.
Secure the bracket to the bottom of FaxFinder's right side using two provided screws as shown in Figures
3 and 4.
6.
Use two screws to attach the second bracket part (Figure 5) to the posts on the first bracket as shown in
Figure 6. The flange side of the bracket should face toward the back.
7.
Repeat Steps 3-6 for the left bracket.
8.
Secure the unit to rack rails by the brackets and mount the FaxFinder in the rack enclosure per the rack
manufacture's mounting procedure. Because equipment racks vary, screws for rack-rail mounting are not
provided. Follow the instructions of the rack manufacturer and use screws that fit.
Cabling FaxFinder
To cable FaxFinder:
1.
Connect the power cord to an outlet or power strip and to the power adapter.
2.
Connect the power adaptor to the 12V connector on the FaxFinder.
®
FaxFinder
FF240-IP Administrator Guide
Figure 4
Figure 5
Figure 6
HARDWARE AND INSTALLATION
15