Network Setup > Cellular Modem - Multitech MultiModem SF 100-G User Manual

Network Setup > Cellular Modem
Use this screen to configure the cellular modems. Click the Modem# tab at the top to work with that
specific modem. Each modem is configured individually.
The TCP Connection section is located in the IP Settings section for theSF 100 modes, and in the Cellular
Modem section for the SF 400 and SF 800 models.
Status
Modem Status (SF 400 and SF 800 models only)
This box will be checked by default, meaning that this modem will be considered for use. If you do
not have or want a SIM card for a particular modem, uncheck the box so that the modem is not
used. Repeat this process for any modems that will not have SIM cards. A graphic to show which
internal modem is assigned to each number is in the SIM card installation section of Chapter 2.
Save
Click the Save button each time before selecting the next modem from the modem tabs above.
Modem Initialization Strings
Initialization Strings 1 – 3
Initialization strings are composed of AT commands sent to the modem to initialize and prepare it
for connection. These strings typically set options such as speed, error correction, compression,
various timeout values, and various display parameters. See the GPRS AT Commands Reference
Guide.
Save
Click the Save button each time before selecting the next modem from the modem tabs above.
Multi-Tech Systems, Inc. MultiModem® iSMS User Guide for Administrators
Chapter 4 – Using the Web Interface
Network Setup > Cellular Modem
34