Main Menu Screen - SANY SY365C LC Operation And Maintenance Manual

SY365C LC Excavator OMM

Main Menu Screen

The Main Menu screen displays icons for various options
that can be accessed via the function icons and function
buttons at the bottom of the screen. Each icon will be
highlighted as it is selected.
1. Press F5 on the home screen to access this screen
See "Home Screen" on page 3-32.
• Work Parameters (1) is password-protected.
Provides access to informational screens that show
data about the various machine systems. See
"Work Parameters Screens" on page 3-38.
NOTE: See "Password Screen" on page 3-38.
• Maintenance Information (2) – Viewable only
when maintenance is required. See "Maintenance
Information Screen" on page 3-39.
• Error Codes (3) – Shows active error codes. See
"Error Codes Screen" on page 3-40.
• Tool Select (4) – Accesses screens for the
adjustment of hydraulic oil flow to attached
equipment. See "Tool Select Screen" on page 3-47.
• Machine Configuration (5) – For SANY technician
use only requires a password. See "Machine
Configuration Screen" on page 3-46.
• System Setting (6) – Allows the operator to change
the language, units of measure, time, and date. See
"System Setting Screen" on page 3-41.
2. Press F1 to select the desired icon.
3. Press F3 to confirm the selection and proceed to the next screen.
4. Press F5 to return to the home screen without selecting any icon.
NOTE: F4 is for use only by SANY-authorized technicians.
SANY
1
Fig. 3-43
Operation and Maintenance Manual — 0420
Machine Controls
2
6 5
F1 F2 F3
3
4
F4 F5
0004549, 0004622
3-37