MACHINE CONTROLS
Main Menu Screen
Figure 3-49
Press the F5 button from the home screen to display the
Main Menu screen. The Main Menu screen consists of
the following six options:
• Work Parameters
• Maint. Information
• Fault Information
• System Setting
• Machine Configuration
• Tool Select
Work Parameter Screen
1
0003703
1. Press the F1 button below the up/down arrow icon
(1) from the Main Menu screen to highlight the Work
Para. (Parameter) icon, then press the F3 button
below the check mark icon (2) to accept the
selection.
2. Press the F1 button below the up/down arrow icon to
scroll through the work parameter screens to display
the following signal screens:
• Engine and throttle signals
• Input switch signals
• Output switch signals
• Pilot pressure signals
• Main pump signals
3. Press the F5 button below the return arrow icon (3) to
return to the Main Menu screen.
3-30
2
Figure 3-50
SY155U Excavator OMM
3
0003704