SANY SY365C LC Operation And Maintenance Manual page 115

SY365C LC Excavator OMM
The home screen displays the following information:
• Current date and time (1)
• Service hours (2)
• Notification icons (3)
• Error code indicator (if any) (4)
• Work tool selected (5)
• Engine coolant temperature gauge (6)
• Function buttons (7)
• Function Icons (8)
• Engine speed (rpm) (9)
• Diesel Exhaust Fluid (DEF) level gauge (10)
• Fuel level gauge (11)
• Work mode (12)
NOTE: The error code warning indicator (4)
illuminates yellow if a failure is detected.
Contact a SANY dealer to correct any error code issues.
5. Sound the horn to warn personnel that the machine is being started.
NOTICE!
Never crank the engine for more than 15 seconds. If the engine fails to start after 15 seconds,
stop and allow the starter motor to cool for at least 2 minutes before attempting another start.
If the engine fails to start after five attempts, contact a SANY dealer. Failure to follow this
notice could damage the machine or cause it to operate improperly.
6. Turn the key switch to START. When the engine starts, release the key. The key will return to the ON position.
NOTE: If the engine fails to start after five attempts, contact a SANY dealer.
7. Check for black exhaust smoke, loud noise, or excessive vibration. If found, shut down the engine immediately
and notify a SANY dealer for assistance.
8. Check the engine instruments and monitor for any error codes after starting.
9. Shut down the engine if an error code is shown on the display screen and contact a SANY dealer.
SANY
1
12
11
10
9
8
Fig. 4-35
Operation and Maintenance Manual — 0420
Machine Operation
2
3
4
5
6
7
0004595 0004615
4-25