Table of Contents
Advertisement
SY365C LC Excavator OMM
25. Add hydraulic oil to the tank through the suction
strainer opening until the hydraulic oil level displays in
the middle of the sight glass (13) on the hydraulic tank.
See "Check the Hydraulic Oil Level" on page 5-29.
26. Replace the O-ring on the suction strainer cover.
27. Install the suction strainer cover and fasteners.
28. Start the engine.
29. Run the engine for 10 minutes to circulate the
hydraulic oil in the hydraulic system.
30. Check the level in the tank and add hydraulic oil if
needed. See "Add Hydraulic Oil" on page 5-64.
31. Check for leaks.
SANY
Fig. 5-96
Operation and Maintenance Manual — 0420
Maintenance
13
0005193
5-75
Advertisement
Table of Contents
