Monitor
Main Menu Screen
Once the password is entered Main Menu displays. The
options includes:
•
Running Information
•
Machine Configuration
•
Failure Information
•
Maintenance Information
•
GPS Information
•
Engine Speed Calibration
•
Language Selection
Press the up or down arrows to scroll through the list of display options.
Press F2 or Enter to select the highlighted option and displays the corresponding screen.
Press F3 to display the System Set Up screen.
Press F4 to display the Main Operator screen.
Details of each of the displays follow.
Running Information Screens
There are two separate Running Information screens; the Engine and Throttle Signals and the Switch Signals
screen. To toggle between these screens press F1 or press the up or down arrows.
Engine and Throttle Signals Screen
The Engine Signals screen displays:
•
Throttle Volt V- Displayed volts
•
Fuel level%- Displayed as% full
•
Engine oil press- Pressure displayed in PSI or Kg
depending on settings made on the Unit Selection
screen.
•
LS Press MPa - Load sensing pressure displayed in
MPa.
•
Throttle Gear N - Throttle setting from 1 to 11
•
Gear Pos Volt- Displayed in volts
3-26
Operation and Maintenance Manual — 0220
SY75C Excavator OMM
System Information
Running Information
Machine Configuration
Failure Information
Maintenance Information
GPS Information
Engine Speed Calibration
Language Selection
Fig. 3-33
Engine & Throttle Signals
:
Fig. 3-34
SANY