Main Menu Screen; Operation Information Screen - SANY SY60C Operation And Maintenance Manual

MACHINE CONTROLS

Main Menu Screen

2
1
Figure 3-8
The Main Menu screen is accessed after entering the
password on the System Information screen. See
"System Information Screen" on page 3-7.
The Main Menu screen displays the main signals to and
from the system controller, including real-time running
information, machine configuration, detailed failure
information, available languages, and maintenance
information. The Main Menu options include:
• Operation Information – Displays real-time engine
operating values, fuel level, and Load Sense (LS)
pressure with the engine running.
• Machine Configuration – Displays basic information
of the excavator.
• Failure Information – Displays detailed failure codes
recorded by the machine.
• Global Positioning System (GPS) Information – Not
used at this time in North America.
• Language Selection – Select the language that
displays information on all display screens.
• Maintain Table – Displays when the machine is due
for maintenance. If maintenance is not due, the
3 4
0003810
Maintain Table screen will not open. The Maintain
Table screen is also used to reset the service timer.
• Press the button below the left/right arrow icon (1) to
scroll to and illuminate the selected icon.
• Press the button below the gear icon (2) to display
the System Setup screen, which is
password-protected for use by SANY only.
• Press the button below the check mark icon (3) to
access an active machine function display.
• Press the button below the return icon (4) to return
to the previous screen.

Operation Information Screen

1
The Operation Information screen displays real-time
engine operating values, fuel level, and Load Sense (LS)
pressure with the engine running:
• Press the button below the up/down arrow icon (1)
to scroll to the next active machine function page.
• Press the button below the return icon (2) to return
to the Main Menu screen.
3-8
2
Figure 3-9
SY60C Excavator OMM
0003084