Electrical Safety - Thermo Scientific Antaris II Manual

Electrical safety

Thermo Fisher Scientific
Your system was designed with protective covers to prevent exposure to
dangerous voltage and other electrical hazards. If you see either of the
following symbols on your system, there is a risk of electric shock in the
vicinity of the symbol.
Warning Before servicing the instrument, turn off the power and disconnect the
power cord from AC power.
Caution Even after the instrument has been disconnected from all voltage sources,
capacitors may remain charged for up to 30 seconds.
You may also see one or more symbols on or near switches and connectors
on your instrument These symbols are often used to identify connectors or
help you to locate user-replaceable fuses.
The table that follows shows the symbols and lists the meaning of each.
Check the documentation that came with your instrument if you find a
symbol that is not included in the table.
Symbol
Description
Alternating current
Earth terminal or ground
Protective conductor terminal
Fuse
Power on
Power off
To prevent injury, refer to the accompanying
documentation
Antaris II and Antaris MX Site and Safety Information
Regulatory and Safety Information
13