Questions Or Concerns; When The System Arrives - Thermo Scientific Antaris II Manual

Questions
or concerns
When the
system arrives
Thermo Fisher Scientific
In case of emergency, follow the procedures established by your facility. If
you have questions or concerns about safety or need assistance with
operation, repairs or replacement parts, you can contact our sales or service
representative in your area or use the information at the beginning of this
document to contact us.
When the system arrives, we recommend that you leave it in the unopened
shipping container until the Thermo Fisher Scientific service engineer
arrives to help you unpack and install it.
Notice Only Thermo Fisher Scientific-certified service and repair engineers are
authorized to qualify an installation. ValPro qualification is valid only if the
instrument remains in its unopened shipping box until the Thermo Fisher
Scientific service representative arrives to unpack and install it.
24 hours 24 hours 24 hours
To prevent damage to the optical components, the shipping box must be
stored at room temperature for at least 24 hours before the Thermo Fisher
Scientific service representative will open it.
If you did not purchase ValPro and qualified installation, you may unpack
the system for inspection. To prevent damage to the instrument, the sealed
shipping container must be stored at room temperature for at least 24
hours before opening it. After inspection, replace all of the components in
their original shipping containers before the service representative arrives.
Thermo Fisher Scientific cannot be responsible for missing components if
the shipping container has been opened.
.
Antaris II and Antaris MX Site and Safety Information
Introduction
3