Table of Contents
Advertisement
Radio-Frequency Electromagnetic Field
Immunity
When a 3 Vm-1 radio-frequency electromagnetic field is applied to the Noise Figure
Analyzer according to IEC 61000-4-3:1995, degradation of performance may be
observed. When the frequency of the incident field matches the frequency of a
measured noise figure or gain, the values displayed will deviate from those
expected. This phenomenon will only affect that specific frequency, and the
Analyzer will continue to perform to specification at all other frequency sample
points.
The Noise Figure Analyzer may be unable to calibrate a chosen frequency sample
point, if the frequency matches that of an incident electromagnetic field.
Declaration of Conformity
A copy of the Manufacturer's European Declaration of Conformity for this
instrument can be obtained by contacting your local Agilent Technologies sales
representative.
Declaration of Compliance
This instrument has been designed and tested in accordance with CAN/CSA
nd
22.2 No. 61010-1-04 & UL Std. No. 61010-1 (2
Edition).
vi
Advertisement
Table of Contents
