F Symbology Parameters - Intermec MaxiScan 2200 Installation Manual

F Symbology parameters
An asterisk (*) indicates the factory default settings for each symbology.
The full set of parameter options for all the symbologies supported is provided with the
EasySet System scanner setup software and in the MaxiScan 2200 Reference Manual .
Codabar
check digit (AIM recommendation) - not used (*)
barcode length (number of characters) - minimum length = 6 (*)
Code 39
MaxiScan 2200 - Installation Guide
activation - not active (*)
- active
start/stop - not transmitted (*)
- a, b, c, d
- A, B, C, D
- a, b, c, d
- DC1, DC2, DC3, DC4
CLSI library system - not active (*)
- active
- no spaces
- checked and transmitted
- checked but not transmitted
- return to current minimum length
- user-defined minimum length
- user-defined 1 or 2 or 3 fixed lengths
activation - active (*)
- not active
Code 39 format - standard 43 characters (*)
- full ASCII
start/stop - not transmitted (*)
- transmitted
check digit - not used (*)
modulo 43 check digit - checked and transmitted
- checked but not transmitted
French CIP check digit - checked and transmitted
- checked but not transmitted
/ t, n, *, e
95