Intermec MaxiScan 2200 Installation Manual page 74

9 Set up the operating parameters
Resolution adjustment (video channel selection)
High-Resolution / Low-Resolution Video Channels (*)
By default, the MaxiScan 2200 is set to switch continuously between the high- and low-resolution video
channels. The video channel changes with each new scan and normal-quality medium-resolution bar
codes such as standard EAN (100%) are read easily by both video channels.
For more "difficult" bar codes, you will greatly optimize reading by selecting the appropriate video
channel (High-Resolution or Low-Resolution) for the bar codes you want to read.
bar codes you want to read
normal-quality medium-resolution bar codes such as
standard EAN (100% magnitude)
high-density bar codes (narrow bar width < 0.2 mm)
ultra-low-density bar codes
(narrow bar width > 1 mm)
bar codes printed with a dot-matrix printer
poorly printed bar codes
High-Resolution Video Channel
74
video channel selection
High-Resolution / Low-Resolution
Video Channels (*)
High-Resolution Video Channel
Low-Resolution Video Channel
Low-Resolution Video Channel
MaxiScan 2200 - Installation Guide