Intermec MaxiScan 2200 Installation Manual page 43

Fixed-position scanner

Hide thumbs Also See for MaxiScan 2200:

Table of Contents

Symbology activation codes and common parameter settings

To optimize the performance of your MaxiScan 2200 and to ensure trouble-free scanning, do not select

symbologies that you do not need.

If possible, do not select more than 2 symbologies at the same time-deactivate the Code 39

and UPC/EAN default symbologies if you do not need to use them.

Codabar ...............................................................................................44

Code 39 ...............................................................................................46

Code 93 ...............................................................................................50

Code 128 / EAN 128 .............................................................................52

Interleaved 2 of 5..................................................................................55

Matrix 2 of 5 .........................................................................................57

MSI Code .............................................................................................59

Plessey Code .......................................................................................62

Standard 2 of 5 .....................................................................................64

By default, the minimum code length for all symbologies except UPC/EAN is 6 characters.

Configuration codes with an asterisk (*) are factory default settings.

MaxiScan 2200 - Installation Guide

8 Set up the symbology parameters

Table of Contents

Chapters

Table of Contents