Intermec MaxiScan 2200 Installation Manual page 102

G MaxiScan 2200 operating parameters
Resetting the factory default settings
Reset Factory Defaults resets all the MaxiScan 2200 operating parameters to their factory default
settings:
null interface (no interface driver selected—no transmission),
default symbologies,
default symbology settings,
default MaxiScan 2200 operating settings (reading distance, scan rate, beep settings, etc.).
If you scan Reset Factory Defaults, you will have to re-enter the appropriate interface number
for your system and any custom settings if applicable. It is often easier to reset individual
parameters.
General reset procedure
1. Make a list of your custom MaxiScan 2200 parameter settings if applicable.
2. Scan Reset Factory Defaults.
3. Scan the interface number for your system (see section 6, Enter the interface
number for your system ).
4. Customize the data transmission settings for your interface if required (see section
7, Set up the data transmission parameters ).
5. Select the symbologies you need and customize the symbology parameter settings
if required (see section 8, Set up the symbology parameters ).
6. Customize the MaxiScan 2200 operating settings if required (see section 9, Set up
the operating parameters ).
102
Reset Factory Defaults
MaxiScan 2200 - Installation Guide