Charging And Installing The Battery; To Charge The Battery; Maximizing Battery Life; Checking The Battery Status - Intermec CN30 User Manual

Charging and Installing the Battery

Maximizing Battery Life

Checking the Battery Status

CN30 Mobile Computer User's Manual

To charge the battery

Either insert the battery into the CN30 AC9 Quad charger or place the
CN30 with battery installed in the AD9 charge dock. For more information
on these accessories, see page 27 'Accessories for the CN30'.
The batteries fully charge in approximately 4 hours.
Note: If you do not plan to use the computer for several months, remove
the keypad module from the console and store it in the shipping box.
To install the battery
Insert the tabs on the bottom of the charged battery into the CN30 56-
Keyboard module and snap the battery into place.
There are several things that you can do to prolong the life of your fully
charged battery.
1 Verify that the backlight timeout is set to 15 seconds.
2 Verify that Power Management has an automatic shutoff time of 3
minutes.
The easiest way to tell the status of your battery is to look at the battery
icon in the status bar of your CN30.
Chapter 1 — Using the CN30 Mobile Computer
5