Configuring The Sf51 Scanner; Imager Settings; Enabling Bluetooth - Intermec CN30 User Manual

Chapter 3 — Configuring the CN30

Configuring the SF51 Scanner

Imager Settings

Enabling Bluetooth

126
The following information pertains to configuring the SF51 Scanner to
work with your CN30 Computer. These instructions assume you have the
EasySet application installed on your desktop or laptop. The EasySet appli-
cation is available from the Intermec Data Capture web site, contact your
Intermec representative for information about this application.
Depending on what is selected as the scanner model, image settings, decode
security, scanner settings, and virtual wedge are configured from the Inter-
mec Settings applet. See the Intermec Computer Command Reference Man-
ual, available from the Intermec web site at www.intermec.com, for more
information about each enabled option.
Bluetooth is required for the SF51 Scanner. On the CN30 Computer, use
the Bluetooth applet to enable Bluetooth communications before you con-
figure the SF51 Scanner.
Select Start > Settings > the Communications tab > the Bluetooth icon,
check Turn on Bluetooth, then click ok to apply this change.
CN30 Mobile Computer User's Manual