Intermec CN30 User Manual page 161

PAP
CHAP
MS-CHAP; MS-CHAP-V2
PAP/Token Card
EAP
CN30 Mobile Computer User's Manual
To enable TTLS with Network EAP:
1 Set 8021x Security as "TTLS."
2 Set Association to "Network EAP."
3 Set Encryption to either "WEP" or "CKIP."
4 Enter your unique Username and password to use this protocol. Select
Prompt for password to have the user enter this password each time to
access the protocol, or leave Use following password as selected to auto-
matically use the protocol without entering a password.
5 Tap Get Certificates to obtain or import server certificates. See page 150
for more information.
6 Tap Additional Settings to assign an inner TTLS authentication and an
inner EAP, and set options for server certificate validation and trust. See
page 149 for more information.
Additional TTLS Settings
1 Select an authentication method from the Inner TTLS Authentication
drop-down list.
Password Authentication Protocol. A simple authentication protocol that sends security
information in the clear.
Challenge Handshake Authentication Protocol. Use of Radius to authenticate a
terminal without sending security data in the clear. Authenticates against non-Windows
user databases. You cannot use this if authenticating against a Windows NT Domain or
Active Directory.
Authenticates against a Windows Domain Controller and other non-Windows user
databases.
Use with token cards. The password value entered is never cached.
Extensible Authentication Protocol
2 If you select "EAP" for the inner authentication protocol, then select an
inner EAP protocol from the Inner EAP drop-down list.
Chapter 3 — Configuring the CN30
149