Intermec CN30 User Manual page 149

Profile Tap the drop-down list to choose between four different profiles assigned to this unit, then
tap Edit Select Profile, make the changes needed for this profile (starting on the next page),
then tap ok to return to the Profiles page.
Enable Microsoft's Check this to enable Microsoft's Wireless Zero Config application and disable the Intermec
Wireless Zero Config software solution for 802.11b/g, including configuration via the Wireless Network applet.
CN30 Mobile Computer User's Manual
Using the Profile Wizard
To start 802.11b/g communications on the CN30 Computer, tap Start >
Settings > the System tab > the Wireless Network icon to access the Profile
Wizard for the 802.11b/g radio module.
A profile contains all the information necessary to authenticate you to the
network, such as login name, password or certificate, and protocols by
which you are authenticated.
You can have up to four profiles for different networks. For example, you
may have different login names or passwords on different networks, or you
may use a password on one network, and a certificate on another.
Use the Profiles page to select and configure between the networking envi-
ronments assigned to this 802.11b/g radio.
Basic
Use the Basic page to set the network type, name, and manage battery
power for this profile. Tap ok to return to the Profiles page.
Chapter 3 — Configuring the CN30
137