Intermec CN30 User Manual page 160

Chapter 3 — Configuring the CN30
148
5 Tap Additional Settings to assign an inner TTLS authentication and an
inner EAP, and set options for server certificate validation and trust. See
page 149 for more information.
To enable TTLS with WPA2 encryption:
1 Set 8021x Security as "TTLS."
2 Set Association to "WPA2."
3 Set Encryption to either "TKIP" or "AES."
4 Enter your unique Username and password to use this protocol. Select
Prompt for password to have the user enter this password each time to
access the protocol, or leave Use following password as selected to auto-
matically use the protocol without entering a password.
5 Tap Get Certificates to obtain or import server certificates. See page 150
for more information.
6 Tap Additional Settings to assign an inner TTLS authentication and an
inner EAP, and set options for server certificate validation and trust. See
page 149 for more information.
CN30 Mobile Computer User's Manual