Chapter 3 — Configuring the CN30
114
• If Bluetooth is disabled, and either a warm-boot or a cold-boot was per-
formed, the CN30 Computer boots up with Bluetooth disabled. Do the
following to turn on Bluetooth:
Select Start > Settings > the Connections tab > the Bluetooth icon > the
Mode tab. Check Turn on Bluetooth, check Make this device discover-
able to other devices, then click ok to apply this change.
Devices
Use this tab to scan for other Bluetooth devices.
1 Tap New Partnership to discover (or scan) for remote Bluetooth devices.
CN30 Mobile Computer User's Manual