Using The Status Lights - Intermec CN30 User Manual

Using the Status Lights

CN30 Mobile Computer User's Manual
Enabling the Speaker and Adjusting the Volume
To enable the speaker and adjust the volume:
1 Tap the Volume icon at the top of the screen.
2 Tap On, then move the system volume slider to the desired volume level.
Up is louder, down is quieter.
3 To mute system sounds, tap Off or move the slider to the bottom.
You can also enable the speaker and adjust the volume with the Intermec
Settings applet. Tap Start > Settings > the System tab > the Intermec Set-
tings icon, then tap (+) to expand Device Settings > Beeper > Volume. Tap
any of the options other than "Off " to enable and adjust. To disable the
speaker, tap the Off option.
The status lights on the CN30 Computer turn on to indicate the status of
the battery or a successful decode of a bar code.
The battery lights and the battery screen icon work with each other to alert
you to the status of your battery. If the battery light (to the right of the
Scan button) comes on, check the status bar to see which battery icon
appears on it. The battery may be critically low and need replacing.
The Good Read light (green) above the display indicates when the CN30
Computer successfully decodes a bar code.
Chapter 1 — Using the CN30 Mobile Computer
19