Trakker Antares 2455/2475 DC Power Supply Installation Instructions
Attaching the 2475 Power Cable to the 2475
Troubleshooting Information
12
5. Use a small straight-slot screwdriver to tighten the two screws in the power cable
connector and secure the cable to the 2455 or 2475.
Reconnecting the Vehicle Battery Cables
Reconnect the vehicle battery cables. You are now ready to begin using your 2455 or
2475. For help operating your 2455 or 2475, refer to the Trakker Antares 2455 Vehicle-
Mount Terminal User's Manual (Part No. 067358) or the Trakker Antares 2475
Vehicle-Mount Terminal User's Manual (Part No. 072383).
This section provides information to help you identify and correct most power supply
problems that may occur during installation.
To diagnose a problem
1. Inspect the power supply components.
2. Measure voltage and continuity.
3. Substitute parts.
IOIOI
Power
24XXI029.eps
cable
connector
12V