Cabling Your Multivoip - Multitech MultiVOIP 100 (MVP110 Quick Start Manual

Cabling Your MultiVOIP

Cabling your MultiVOIP involves making the proper Power,
Command Port, phone system, and Internet connections.
Figure 5 shows the back panel connectors and the associated
cable connections. The following procedure details the steps
necessary for cabling your MultiVOIP.
1. Connect the power supply to a live AC outlet, then connect
it to the MultiVOIP as shown in Figure 5.
Figure 5. Cable Connections
2. Connect the MultiVOIP to a PC using the RJ-45 to DB9
(female) cable provided with your unit. Plug the RJ-45 end
of the cable into the Command port of the MultiVOIP and
connect the other end to the PC serial port you are using.
See Figure 5.
3. Connect a network cable to the Ethernet connector on the
back of the MultiVOIP. Connect the other end of the cable
to your network.
4. If you are connecting a station device such as an analog
telephone, a fax machine, or a Key Telephone System
(KTS) to your MultiVOIP, connect an RJ-11 cable to the
Cabling
9