Table of Contents
Advertisement
MultiVOIP Quick Start Guide
20. Click Download Setup to write the new configuration to
the slave unit. The Save Setup dialog box displays.
21. Select the Save Current Setup as User Default
Configuration check box and click OK. The setup
configuration is written to the MVP110. After the setup is
written to the MVP110, it reboots.
22. Check that the Boot LED on the MVP110 is off after the
download is complete. This may take several minutes as
the MVP110 reboots.
23. You are returned to the Main menu.
Your MVP110 is operational at this time.
Repeat the process for each of the slave units. When all
slaves have been configured, go to "Deploying the VOIP
Network."
44
Advertisement
Table of Contents
