Table of Contents
Advertisement
MultiVOIP Quick Start Guide
that support Diffserv (sometimes called IP Precedence).
This feature gives priority to voice packets so they are not
delayed because of large data files being downloaded.
The default Frame Type is TYPE_II. If this does not match
your IP network, select the Frame Type from the Frame
Type list. The Frame Type choices are TYPE_II and
SNAP.
4. In the Port Address group, enter the IP Address and IP
Mask. In the Gateway Address group, enter the gateway
IP address for the slave unit.
The IP Address is the unique IP address that you assign to
the MVP110, and the Gateway Address is the IP address
of the device (such as a network router) connected to the
Internet/Intranet.
Click OK when you are finished. The Main menu displays.
5. From the Main menu, click Voice Channel to display the
Channel Setup dialog box. The Channel Setup dialog
box displays. The four tabs in this dialog box define the
channel interface, voice/fax parameters, Billing/Misc
parameters, and regional telephone parameters for the
channel.
36
Advertisement
Table of Contents
