Table of Contents
Advertisement
this happens, hang up and dial again. The default setting
is 2 seconds.
14. The Ring Count FXS box enables you to set the
maximum number of rings output on the FXS interface
before hanging up and releasing the line to another call.
The default setting is 8 rings.
Note: Zero (0) means no rings - caller hears a busy tone.
The Message Waiting Light check box must be selected
on the originating and answering voice channel. This
enables the number dialed to connect you to the
appropriate voice channel, then output that number on the
voice channel. This feature does not work FXS to FXS.
15. The Voice/Fax tab displays the parameters for the voice
gain, DTMF (Dual Tone Multi-Frequency) gain, voice
coder, faxing, and advanced features such as Silence
Compression, Echo Cancellation, and Forward Error
Correction.
16. You can set up the input and output voice gain so that the
Configuring the MultiVOIP
17
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiVOIP MVP110 and is the answer not in the manual?
Questions and answers