Agilent Technologies E1300B User Manual page 70

Returning to the "Select an
Instrument" Prompt
Control Sequences for
Terminal Interface Functions
3-22 Using the Display Terminal Interface
To get a list of the logical addresses used in your mainframe, send the SCPI
command VXI:CONF:DLAD? to the System Instrument. Then to determine
what instrument is at each logical address, send the command
VXI:CONF:DLIS? n for each logical address in the list (where n is a logical
address).
To return to the "Select an instrument" prompt, press and hold the CTRL key
then press D.
The terminal interface provides the keyboard control sequences listed in Table
3-3. These can be thought of as keyboard short-cuts for compatible terminals
(those which provide menu capability). Only those functions in the table which
are shaded, operate for "UNKNOWN" terminal types (those which do not
support menus). An "UNKNOWN" terminal type has very limited editing
capability. It will not support the EDIT mode for the optional IBASIC
interpreter. In the following table, † = IBASIC only, ‡ = Front Panel only.
Table 3-3. Control Sequence Functions
Del char Delete character at the cursor position
Clr end Clears line from cursor position to end of line
Clear line Clears line regardless of cursor position
Insert line † Inserts a blank line at the cursor position
Delete line † ‡ Deletes the line at the current cursor position
End of line Move cursor to the end of current line
Start of line Move cursor to the beginning of current line
Return Terminates user entry
RCL_MENU Recalls the last command executed via the
menu keys
RCL_PREV Recalls the last several commands executed
via user input
RCL_NEXT After RCL_PREV, RCL_NEXT may be
used to move forward through the recalled
commands
SEL_INST Return to "Select an instrument" menu
CLR_INST Clear instrument's input and output buffers
RST_INST Like CLR_INST plus clears
CTRL-X
CTRL-L
CTRL-U
CTRL-O
CTRL-DEL
CTRL-Z
CTRL-A
CTRL-M
CTRL-W
CTRL-F
CTRL-B
CTRL-D
CTRL-C
CTRL-R