Agilent Technologies E1300B User Manual page 146

DIAGnostic:DRIVer :LIST[:type]?
:DRIVer :LIST[:type]?
Parameters
Comments
Example
Example
7-18 System Instrument Command Reference
DIAGnostic:DRIVer:LIST[:type]? lists all drivers from the specified table found
on the system. If no parameter is specified, all driver tables are searched and the
data from each driver table is separated from the others by a semicolon.
Parameter Parameter
Name Type
type discrete
For each driver listed, the following items are returned:
NAME, IDN_MODEL, REV_CODE, TABLE
Parameter
NAME
IDN_MODEL
REV_CODE
TABLE
DIAGnostic:DRIVer:LIST? lists all drivers found in the system.
DIAGnostic:DRIVer:LIST:RAM? lists all drivers found in the RAM
driver table DRAM.
DIAGnostic:DRIVer:LIST:ROM? lists all drivers found in the ROM
driver table.
Related Commands:DIAG:DRAM:AVAilable?,
DIAG:DRAM:CREate, DIAG:DRIVer:LOAD...
List all drivers in the system.
DIAG:DRIV:LIST?
List all drivers in ROM.
DIAG:DRIV:LIST:ROM?
Range of
Values
ALL| RAM| ROM
Description
The instrument name. This is the same label that
appears on the instrument selection menu.
The model name. This is the same model name as
used in the response to the *IDN? command.
The revision code. It is in the form A.nn.nn where A
as an alpha character
The name of the table the driver was found in.
This will be RAM or ROM.
lists all drivers currently loaded.
lists all of the drivers currently
loaded in ROM.
Default
Units
ALL