Agilent Technologies E1300B User Manual page 167

:COMMunicate
:SERial[n] :CONTrol
:RTS?
Example
:COMMunicate
:SERial[n] [:RECeive]
:BAUD
Parameters
Comments
Example
:COMMunicate
:SERial[n] [:RECeive]
:BAUD?
Example
SYSTem :COMMunicate :SERial[n] :CONTrol :RTS?
SYSTem:COMMunicate:SERial[n]:CONTrol:RTS? returns the current setting
for RTS line control.
Checking the setting of RTS control.
SYST:COMM:SER0:CONT:RTS?
enter statement
SYSTem:COMMunicate:SERial[n][:RECeive]:BAUD < baud_rate> Sets the
baud rate for the serial port.
Parameter Parameter
Name Type
baud numeric
Attempting to set baud to other than those values shown will result in an
error -222.
DIAG:BOOT:COLD will set
*RST condition: No change.
Setting the baud rate to 1200.
SYST:COMM:SER0:BAUD 1200
SYSTem:COMMunicate:SERial[n][:RECeive]:BAUD? [MIN | MAX] returns:
The current baud rate setting if no parameter is sent.
The maximum allowable setting if MAX is sent.
The minimum allowable setting if MIN is sent.
Querying the current baud rate.
SYST:COMM:SER0:BAUD?
enter statement
statement enters the string
"ON", "OFF", "STAN", or "IBF"
Range of
Values
300 | 1200 | 2400 | 4800 |
9600 | 19200 | MIN | MAX
BAUD to 9600.
statement enters a numeric
value
System Instrument Command Reference 7-39
Default
Units
none