Agilent Technologies E1300B User Manual page 171

:COMMunicate
:SERial[n] [:RECeive]
:PACE :THReshold
:STOP
Parameters
Comments
Example
:COMMunicate
:SERial[n] [:RECeive]
:PACE :THReshold
:STOP?
Comments
Example
SYSTem :COMMunicate :SERial[n] [:RECeive] :PACE :THReshold :STOP
SYSTem:COMMunicate:SERial[n][:RECeive]:PACE:THReshold:STOP
< char_count> configures the input buffer level at which the specified interface
may send the XOFF character (ASCII 13
de-assert the RTS line.
Parameter Parameter
Name
char_count numeric
To determine the size of the input buffer of the serial interface you are
using, send SYST:COMM:SER[n]:PACE:THR:STOP? MAX. The
returned value will be the buffer size.
STOP must be set to greater than
The THR:STOP command has no effect unless
PACE:PROT XON,
been sent.
Related Commands:
CONT:RTS
*RST Condition: No change
Set interface to send XOFF when input buffer contains 80 characters.
SYST:COMM:SER0:PACE:THR:STOP 80
SYSTem:COMMunicate:SERial[n][:RECeive]:PACE:THReshold:STOP?
[MIN | MAX] returns:
The current stop threshold if no parameter is sent.
The maximum allowable setting if MAX is sent.
The minimum allowable setting if MIN is sent.
To determine the size of the input buffer of the serial interface you are
using, send SYST:COMM:SER[n]:PACE:THR:STOP? MAX. The
returned value will be the buffer size.
Return current stop threshold
SYST:COMM:SER0:PACE:THR:STOP?query for threshold
enter statement
), de-assert the DTR line, and/or
16
Range of
Type
1 through 99 for built-in
1 through 8191 for E1324A
STARt.
CONT:DTR IBF, or
PACE:PROT XON | NONE,
System Instrument Command Reference 7-43
Default
Values Units
none
CONT:DTR IBF has
CONT:DTR,
statement enters a numeric
value