Agilent Technologies E1300B User Manual page 152

DIAGnostic:NRAM:CREate?
:NRAM:CREate?
Comments
Example
:PEEK?
Parameters
Comments
Example
7-24 System Instrument Command Reference
DIAGnostic:NRAM:CREate? [MIN | MAX] Returns the current or allowable
(MIN | MAX) size of the User non-volatile RAM segment.
DIAG:NRAM:CRE does not allocate driver RAM until a subsequent
re-boot. To get accurate results, execute DIAG:NRAM:CRE? after the
re-boot.
Related Commands: DIAG:NRAM:ADDRess?, DIAG:NRAM:CREate
Check the size of the User RAM segment.
DIAG:NRAM:CREate?
enter statement
DIAGnostic:PEEK? < address> ,< width> reads the data (number of bits
given by width) starting at address.
Parameter Parameter
Name Type
address numeric
width numeric
Address specifies a location within the range of the control processor's
addressing capability.
Address may be specified in decimal, hex (# H), octal (# Q), or binary
(# B) formats.
Related Commands: DIAG:POKE
Read byte from User non-volatile RAM
DIAG:PEEK? 16252928,8
enter statement
statement enters size in bytes
Range of
Values
0 to 16,777,215 (# HFFFFFF)
8| 16| 32
ask for byte
return value of byte
Default
Units
none
none