Agilent Technologies E1300B User Manual page 169

:COMMunicate
:SERial[n] [:RECeive]
:PACE [:PROTocol]
Parameters
Comments
Example
:COMMunicate
:SERial[n] [:RECeive]
:PACE [:PROTocol]?
Example
SYSTem :COMMunicate :SERial[n] [:RECeive] :PACE [:PROTocol]
SYSTem:COMMunicate:SERial[n][:RECeive]:PACE[:PROTocol]
< protocol> enables or disables receive pacing (XON/XOFF) protocol.
Parameter Parameter
Name Type
protocol discrete
While PROT is XON, the serial interface will send XOFF when the
buffer reaches the
the STARt threshold.
For an Agilent E1324A, AUTO is always ON. In this case
[:RECeive]:PACE will also set
The XON character is control Q (ASCII 17
character is control S (ASCII 19
DIAG:BOOT:COLD will set
Related Commands:
PROTocol:THReshold:STOP,
*RST Condition: No change
Enabling XON/XOFF handshaking.
SYST:COMM:SER0:PACE:PROT XON
SYSTem:COMMunicate:SERial[n][:RECeive]:PACE[:PROTocol]? returns the
current receive pacing protocol.
See if XON/XOFF protocol is enabled.
SYST:COMM:SER0:PACE:PROT?
enter statement
Range of
Values
XON| NONE
STOP threshold, and XON when the buffer reaches
TRAN:PACE
, 11
10
, 13 ).
10 16
PACE to XON.
PROTocol:THReshold:STARt,
TRAN:AUTO
statement enters the string
"XON" or "NONE"
System Instrument Command Reference 7-41
Default
Units
none
), The XOFF
16