Agilent Technologies E1300B User Manual page 205

Command
SYSTem
:BEEPer
[:IMMediate]
:COMMunicate
:GPIB
:ADDRess
:ADDRess?
:SERial[n]
:CONTrol
:DTR ON| OFF| STANdard| IBFull
:DTR?
:RTS ON| OFF| STANdard| IBFull
:RTS?
[:RECeive]
:BAUD <
:BAUD? [MIN| MAX]
:BITS 7| 8| MIN| MAX
:BITS? [MIN| MAX]
:PACE
:PARity
:SBITs 1| 2| MIN| MAX
:SBITs? MIN| MAX
:TRANsmit
:AUTO 1| 0| ON| OFF
:AUTO?
:PACE
:DATE <
year> ,< month> ,< day>
:DATE? [MIN| MAX,MIN| MAX,MIN| MAX]
:ERRor?
:TIME <
hour> ,< minute> ,< second>
:TIME? [MIN| MAX,MIN| MAX,MIN| MAX]
:VERSion?
SCPI Commands Quick Reference
baud_rate> | MIN| MAX
[:PROTocol] XON| NONE
[:PROTocol]?
:THReshold
:STARt <
char_count>
:STARt? [MIN| MAX]
:STOP <
char_count>
:STOP? [MIN| MAX]
:CHECk 1| 0| ON| OFF
:CHECk?
[:TYPe] EVEN| ODD| Z ERO|
ONE| NONE
[:TYPe]?
[:PROTocol] XON| NONE
[:PROTocol]?
Description
Sound beeper (fixed duration and tone).
Sets the primary address of the communications port.
Returns GPIB address or min| max allowed value.
Sets mode for modem control line DTR.
Returns current mode of DTR line.
Sets mode for modem control line RTS.
Returns current mode of RTS line.
Sets transmit and receive baud rate of serial interface.
Returns the current or allowable baud setting.
Sets the number of data bits in the serial data frame.
Returns the current or allowable BITS setting.
Sets the receive pacing protocol to XON/XOFF or none.
Returns the state of receive pacing protocol.
Sets the input buffer start threshold for input pacing.
Returns current or allowable STARt threshold level.
Sets the input buffer stop threshold for input pacing.
Returns the current or allowable STOP threshold level.
Enables/disables receive parity checking.
Returns the current state of receive parity checking.
Sets the type of receive and transmit parity.
Returns the current parity type setting.
Sets the number of stop bits for receive and transmit.
Returns the number of stop bits set.
Note: Agilent E1324A is always
Links/unlinks the transmit and receive pacing protocol.
Returns the current transmit/receive pacing linkage.
Sets the transmit pacing protocol to XON/XOFF or none.
Returns the state of transmit pacing protocol.
Sets system calendar.
Returns current date or min| max allowable values.
Returns oldest error message in Error Queue.
Sets the system clock.
Returns current time or min| max allowable values.
Returns SCPI version for which this istrument complies.
Command Quick Reference 7–77
System Instrument
TRAN:AUTO ON