Otto Bock 17B66 16 Instructions For Use Manual page 7

Item Component
– System foot stirrup
– System shoe stirrup
3 Intended use
3.1 Indications for use
The orthotic ankle joints are to be used exclusively in pairs to provide orthotic treatment for a patient's lower
limbs.
The manufacturer recommends processing the orthotic ankle joint using the thermoplastic, lamination or prepreg
technique.
3.2 Indications
Partial or total paralysis of the leg muscles.
Indications must be determined by the physician.
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
4.2 Safety instructions
CAUTION
Excessive strain on load-bearing components
Injuries due to changes in or loss of functionality
► Only use the product for the defined area of application.
► If the product has been exposed to extreme strain (e.g. due to falling), take any necessary measures
(e.g. repair, replacement, inspection by the manufacturer's customer service, etc.).
CAUTION
Mechanical damage to the product
Injuries due to changes in or loss of functionality
► Use caution when working with the product.
► Check the product for proper function and readiness for use.
► In case of changes in or loss of functionality, discontinue use of the product and have it checked by author­
ised, qualified personnel.
CAUTION
Incorrect alignment, assembly or adjustment
Injury and damage to product components
► Observe the alignment, assembly and adjustment instructions.
► Work on the product may only be carried out by qualified personnel.
CAUTION
Excessive strain due to use on more than one patient
Risk of injury and loss of functionality as well as damage to the product
► Use the product on only one patient.
► Observe the maintenance recommendations.
17B66=16, 17B66=2017B66=A-16, 17B66=A-20
Article number
17B115
17B116
Intended use
7