Otto Bock 9X50 Instructions For Use Manual page 17

CAUTION
Remaining in areas outside the allowable temperature range
Injury due to faulty control or malfunction of the product.
► Avoid remaining in areas outside the allowable temperature range (see
page 19).
CAUTION
Signs of wear on the product
Injury due to faulty control or malfunction of the product.
► Since signs of wear can occur with all moving parts, annual service is
required.
NOTICE
Improper care
Damage or breakage through the use of acetone, petrol or similar solvents.
► Clean the product and the contacts with a damp cloth and mild soap
only.
5 Scope of Delivery and Accessories
5.1 Scope of delivery
• 1 pc. 9X50 linear control element
• 1 pc. 9X51 4-stage control element
• 1 pc. Instructions for use (qualified personnel)
5.2 Accessories
The following components are not included in the scope of delivery and must
be ordered separately:
• 13E129=* electrode cable
6 Preparing the product for use
6.1 Required tools
• 633F11 silicone grease
6.2 Connecting the electrode cable
1) Shorten the electrode cable as needed.
2) Push the electrode cable with the grey side up into the plug connection
all the way to the stop (see fig. 1).
17