Table of Contents
Advertisement
4.S - Accessories, Accessory Products
Attaching a safety belt
Attach the safety belt with the screws provided to
the bore hole shown in the photo of the central unit.
Attaching a thoracic support
The side thoracic support is mounted to the back tubes
using the mounting kit provided. To adapt the support
to the patiet open the three screws on the back, bring
the support in the desired position and retighten the
screws.
Attaching a tray
A tray can be attached to all armrests.
Attaching a headrest mounting kit
The headrest mounting kit is pushed onto the push
handles and clamped with the star grip screw.
For adaptation to the wheelchair's seat width, open
the Allen screws on the back side of the mounting
kit and move the parts within each other. Retighten
the screws. All standard headrests of the Otto Bock
wheelchair accessories range can be mounted to the
headrest mounting kit.
33
Advertisement
Table of Contents
