H Brake / Wheel Lock - Otto Bock Start M1 Intro Service Manual

Attaching a spoke protector to the standard wheel
Lay the spoke protector onto the wheel such that the
notches match the screw connections of the push ring.
Starting with a round hole press on the spoke protector
with an attachment nipple. We recommend to use a
hammer shaft for this work step. Press all nipples onto
the spokes, one after the other.
Attaching e-support
Remove the standard rear wheel adapters from the
central unit. Attach the e-support rear wheel adapter
to the central unit as shown in the photo and fix it at
the four indicated positions.
For further assembly, please proceed as described in the
e-support instructions for use manual (647H388).
28
Attaching a spoke protector to a wheel with drum
brake
Lay the spoke protector onto the wheel such that the
notches match the screw connections of the push ring.
Starting with a slotted hole keep the respective spokes in
mind and mount screw clamps to the spokes as shown
in the photo. Screw the spoke protector to these screw
clamps using the set of screws provided.
Attaching z50
Remove the standard rear wheel adapters from the
central unit. Attach the z50 rear wheel adapter to the
central unit as shown in the photo and fix it at the
indicated positions.
For further assembly, please proceed as described in
the z50 instructions for use manual (647H35).