Table of Contents
Advertisement
Settings
2
4
6.2.1.2 Adjusting the shock absorber in the frame
The shock absorber can be continuously adjusted in the horizontal direction in the frame.
1) Loosen the clamping bolts on the half shells of the shock absorber top and bottom (see fig. 5, item 1).
2) Move the shock absorber. Use the bores in the frame for orientation (see fig. 6, item 1).
3) Tighten the clamping bolts to 8 Nm (see fig. 6, item 2).
→ Once changed, the left and right shock absorber must have the same horizontal position on the frame.
5
6.2.2 Adjusting the seat height and seat inclination
INFORMATION
The adjustments described below may not be carried out on the CLT or CLT Ultra model.
The seat height and the seat inclination are adjusted by moving the quick-release axle mounting (fitting)
in the drive wheel adapter. This has the following effects:
10
3
6
1)
vertically
Avantgarde 4
Advertisement
Table of Contents
