Installation - Yamaha VK540EF Service Manual

Hide thumbs Also See for VK540EF:

Table of Contents

S If the float height is not within specification, in-

spect the valve seat and needle valve.

S If either is worn, replace them both.

S If both are fine, adjust the float height by bend-

ing the float arm tang 1 on the float.

S Recheck the float height.

INSTALLATION

After installing all parts, refer to "CABLE ROUT-

ING" in CHAPTER 8, to check the cable, lead

and hose routings.

S Starter cable freeplay

Refer to "STARTER (CHOKE) CABLE AD-

JUSTMENT" in CHAPTER 2.

Table of Contents